Chair-Type Spacer (E)
Plastic spacers guarantee the correct covering of concrete, centralize the steel reinforcements and protect the structure from corrosion. The spacers remain permanently inside the structure after concreting, providing minimal contact with the formwork and guaranteeing a better finish.
Specifications
• It guarantees the centralization and covering of the reinforcing steel;
• It fixes in several steel diameters;
• Improves the quality of the work;
• Reduces concrete waste;
• It expedites activities in the work;
• Minimum contact with the formwork, due to the external borders of the piece;
• It fixes in several steel diameters;
• Improves the quality of the work;
• Reduces concrete waste;
• It expedites activities in the work;
• Minimum contact with the formwork, due to the external borders of the piece;
Usage
• It can be used in several Steel diameters;
• Indicated for vertical fittings such as pillars, columns, posts, beam sides and more;
• Check tables of the ABNT NBR 6118: 2014 standard for sizing;
• Recommended the use of 4 to 5 units per m²;
• Indicated for vertical fittings such as pillars, columns, posts, beam sides and more;
• Check tables of the ABNT NBR 6118: 2014 standard for sizing;
• Recommended the use of 4 to 5 units per m²;
Colors
Grey
Technical Information
Tap and swipe
| Chair-Type Spacer | ||
| Code | A* | Steel |
| E10/1520 | 15 mm a 20 mm | até 10 mm |
| E12/2530 | 25 mm a 30 mm | até 12 mm |
| * Coverage: The thickness of the concrete layer on the pillar steel, beams and slabs varies according to the environment in which the work is carried out; | ||
